R.T.P PAGANONI srl
has its headquarters in Cesana Brianza (LC) at no. 20 via C. Porta. Located in the industrial zone of the town, it is easy to reach from Milan (about 50 km away), Lecco (20 km), Como (30 km) and from Switzerland. The map alongside and road signs clearly indicating the name of the company will enable you to reach R.T.P.
ORIGINAL PRODUCTS RTP
HEINZE & STRENG GMBH
TDI ENTERPRISE INC
GRAF IND � VERTRETUNGEN OHG
Professionals at your service:
The RTP PAGANONI has a sales network that is composed of highly qualified professionals.A complete list of our authorized distributors is provided below:
R.T.P PAGANON srl.
Via Carlo Porta, 20
23861 Cesana Brianza (LC) Italy.Telephone: +39 031658234
FAX: +39 031658235
Z1500excellent slip resistance, lower surface roughness and best mechanical resistance.
Z1000excellent resistance to acids and salts, great wear resistance, very good high temperature resistance, etc PAGANOX: very high hardness, very high wear resistance, lower weight, good thermal shock resistance.
PAGANOX ®PAGANOX®: very high hardness, very high wear resistance, lower weight, good thermal shock resistance.
APPLICATIONCones and rings for red or tin coated copper wire, Pulleys for copper coating tanks, High speed pulleys, Rollers, Wire guides and cylinderrs
BLACK CERAMIC COATING "HDC"
ADVANTAGES: This type of coating based Oxide Chrome is black. The piece covered with ceramics "HDC" offers excellent resistance to mechanical wear and corrosion. In addition, to achieve very good results in terms of finish.
APPLICATION COATINGS ON:Drawing cones Aluminium pulleys Rollers Capstans up to a diameter of 1300 mm. Seal rings and shaft seal seats
COATING DIAMOND 3000 Carbide agglomerate HRC 60.0 - 66.0
ADANTAGES: Excellent resistance to wear and abrasions, ������������ strong grip on any kind of material. Being a coating ������������ no insulation allows a strong dispersion of heat wire
application :This coating was tested as an alternative to ceramic ���������� for dry drawing sucabestani up to 1200 mm diameter.
DIAMOND 2000 coating
ADANTAGES: It 'a special blend of carbides and exclusive with which are coated cones and steel rings that ground and lapped. This type of coating is melted on piece guaranteeing 100% anchoring and offering an exceptional durability. After several studies and tests the DIAMOND 2000, thanks to its particular particle size, is excellent result the drag of the wire. With this type of coating are obtained risultai excellent level of finish.
application :Such coating is proved to be suitable for the drawing of ferrous and non-ferrous wires.
DIAMOND 3000Agglomeration of carbides BENEFITS: Excellent resistance to wear and abrasions, strong grip on any kind of material. Being a non-insulating coating allows a strong dispersion of heat the wire. USE: This coating was tested as an alternative to ceramic for dry drawing sucabestani up to 1200 mm diameter.
"HDC" BLACK CERAMIC
"HDC" coating has been tested and extensively used with surprising performance on capstsns for steel wire dry drawing up to 8 mm. Major Original Equipment Manufactures use this coating since over 20 years with success of excellence. we have the capability to coat parts supplied by the customer as well as to manufacture brad new ones, on customer drawing.
KICOMPLETE SET FOR COPPER COATING TANKS
ACCESSORIES FOR COPPER COATING TANKS Stainless steel shaft with Ceramic liner based on yellow Zirconia(zro2) High Density polyethylene pulleys with yellow Zirconia Ceramic insert. Gree, self-lubricating polyethylene sleeves designed to avoid them to stuck on their Ceramic pulleys (see picture)
For relevant quantities we my produce pulleys on your own dimension, out of standard.
PAST AND PRESENT
In 1971 Angelo Paganoni, with the experience gained working alongside his father, a wire drawing machine manufacturer, established OFFICINA MECCANICA PAGANONI ANGELO for the manufacture of the first wire drawing cones with tungsten carbide coating.With fearless determination and tenacity, in 1990 he established r.t.p. paganoni s.r.l., with the specific aim to further his research in field of wire drawing cones. It was not long before the new company achieved national and international recognition, also thanks to its continued effort to make innovative solutions available to its customers. ������������ ����������� � PRESENTLY, r.t.p. creates special and unique products that year by year enrich its production line. These are presented at the most important international trade fairs such as the biennial event Wire Dusseldorf. Today, the primary objective of the company is to deliver products offering exceptional wear resistance, abrasion resistance and corrosion resistance, while attempting to combine high quality with reasonable prices. But R.T.P is also open to new fields of application, and this is why it accepts inquiries from companies operating in sectors outside of wire drawing.
COMING SOONR.T.P. PAGANONI POLSKA SP. Z.O.O. in Krakow, Poland
4 / 8 april 2016 WE WILL BE AT WIRE DUSSELDORF PAD. 11 B 22
SEVERAL EXAMPLES OF PROCESSING AND RECONDITIONING WORK ON CUSTOMER SUPPLIED PARTS